<
product overview
Demo Program
Literature
Dynatronix has once again raised the bar on power supply design. Looking to fill the void left in the power supply market when seemingly all suppliers have moved to microprocessor based controls and soft-touch keypads; Dynatronix has taken its proven MicroStar DC Series and lightened it up.
Going back to the days of basic DC power supplies, the new Lite (LT) Series is equipped with two 10-turn potentiometers for voltage, current or cross-over regulation and two digital meters for voltage and current read back. Packaged in the same sealed design as the MicroStar Series, yet now dressed in 316 stainless steel, the LT Series is designed to stand up to the harsh environments that we all know exist in many of today’s plating shops.
With the only available option being an analog interface board for PLC control, the LT Series is great for your reel-to-reel line or any other PLC driven process. There are no extra features that you end up paying for, but may never use.
The LT Series is available in either 12 volts or 24 volts, with current ratings from 10 amps to 300 amps. Dynatronix also offers a 10 volt, 500 or 1000 amp model as well. Call us today and let us help you shed some LITE on your process!
Remote control via:
Analog I/O from Programmable Logic Controller (PLC) using
individual analog I/O modules. Typically used for distances over
50 feet. Requires isolated analog interface board installed
in power supply.
Output settings typically set
via 4/20mA, 0-5 volt or 0-10 volt signal
Output monitored typically via 4/20mA, 0-5 volt or 0-10
volt signal
(Voltage is sometimes monitored directly from plating bath)
Note: All
analog signals must be isolated between controlling device
ground and power supply ground.
Additional functions such as operate/standby (inhibit) can
be performed with digital I/O modules from PLC or digital
I/O card from PC. All signals must be ground isolated between
controlling device and power supply.
